RETAINER PACKAGE-2/PK

Retainer Kit
CURT GROUP
This replacement retainer kit is made to fit certain Curt round bar weight distribution hitches. Designed to keep spring bars attached to the WD head. Includes: two clips, two locking pins and two rivets.
Stock #Retail
1205-25
Request quote

LONG L-BRACKET KIT-2/PK

Long L-Bracket Replacement Kit - 2/PK
BLUE OX
Replacement Long L-Brackets for Blue Ox TrackPro and 2-Point Weight Distribution hitches. Includes: 2 Brackets and mounting hardware.
Stock #Retail
1271-16
Request quote

ROTATING LATCH BOLT-ON

Swaypro™ Bolt On Rotating Latch Kit
BLUE OX
For use on all SwayPro™ weight distributing hitch models.
Stock #Retail
1271-18
Request quote

ROTATING LATCH CLAMP ON

Swaypro™ Clamp On Rotating Latch Kit
BLUE OX
Install the hitch; Position the trailer on the ball; Place the sway bars on the hitch; Set the rotating latch assembly on the frame so that the chain aligns with the center of the rotating latch; Install appropriate set screw and locking hex nut; Torque all bolts to approximately 15-20 ft. lb.; Rotate the latch clockwise, place the chain into the slot Twist the latch counterclockwise to lock. Do this to both sides.
Stock #Retail
1271-19
Request quote

OnTarget Towing Tool

PROGRESS MFG
The OnTarget™ Towing Tool by Equal-i-zer gives you peace of mind. It is the easiest and fastest way to measure your weight distribution. With a few quick measurements, it calculates your weight distribution percentage, so you can make the adjustments needed for a comfortable, safer tow. Whether you are installing your hitch yourself, or a dealership professionally installed your hitch, it is important to make sure your setup has the proper weight distribution percentage. Even small changes in trailer cargo, like full or empty water tanks, can affect your weight distribution and reduce tow vehicle stability. Now there is a simple, easy way to make sure your weight distribution is OnTarget. The OnTarget also makes campsite set up quick and easy. Use the laser distance measuring feature to quickly show how deep your campsite is or whether or not you can fully extend your awning in a wooded area. The OnTarget can also be used to level your trailer, which provides a more enjoyable stay.
Stock #Retail
474-10
Request quote

BETTERWEIGH TOWING SCALE

CURT GROUP
BetterWeigh™ wirelessly links to your smartphone to display real-time vehicle and trailer weights. It easily plugs into any standard vehicle diagnostic port (OBD-II) under the steering wheel, and uses Bluetooth to connect to your Apple or Android phone. It then sends a live readout of all weights related to towing and hauling, including the gross weight of your vehicle and trailer, cargo, payload, tongue weight, pin weight and weight distribution. This streamlines the towing setup process for any vehicle-trailer combination and promotes maximum safety on the road. The compact, portable design also allows for easy transfer from one vehicle to another.
Stock #Retail
474-6
Request quote

3214 ADJ. HITCH BAR - 14"

Weight Dist. Shank, 14,000 Lbs (GTW), 1,400 Lbs (TW) - 14” Length
CEQUENT TOWING PRODUCTS
All adjustable hitch bars (shank) can be used in raised or dropped position. Designed for use with all Trunnion and Round Bar Hitches. Long Hitch bars provide the extra length for bumper clearance. Black Powder Coat Finish. Box w/Label.
Stock #Retail
832-10
Request quote

3215 ADJ. HITCH BAR - TALL

6-7/8" Drop, 10-1/8" Rise, 11" Length
CEQUENT TOWING PRODUCTS
Designed for use with all Trunnion and Round Bar Weight Distribution Kits. Can be used in the rise or drop position. 2" x 2" Solid Shanks. Black powder coat finish. 1400/14,000 lbs (TW/GTW).
Stock #Retail
832-11
Request quote

BOLT-ON W/D CHAIN HANGERS

Wt. Dist. Accessory Chain Hanger, Bolt On
CEQUENT TOWING PRODUCTS
Use these brackets when the traditional snap up bracket won't fit because the propane tank rack,"
Stock #Retail
832-16
Request quote

CLAMP-ON W/D CHAIN HANGERS

Wt. Dist. Accessory Chain Hanger, Clamp On
CEQUENT TOWING PRODUCTS
Use these brackets when the traditional snap up bracket tank, battery box etc are in the way. These slimmer brackets take up less space on the trailer tongue and install without drilling.
Stock #Retail
832-17
Request quote

Handy Hitch Handle

1-Hole
Handy Hitch Handle is lightweight, durable and bolts together in minutes. Transporting that dirty, greasy, heavy hitch bar can now be done with ease.
Stock #Retail
832-18
Request quote

HANDY HITCH HANDLE - 2 HOLE

DEREK SCOTT
Handy Hitch Handle is lightweight, durable and bolts together in minutes. Transporting that dirty, greasy, heavy hitch bar can now be done with ease.
Stock #Retail
832-19
Request quote

HANDY HITCH HANDLE-1HOLE PLATE

DEREK SCOTT
Handy Hitch Handle is lightweight, durable and bolts together in minutes. Transporting that dirty, greasy, heavy hitch bar can now be done with ease.
Stock #Retail
832-20
Request quote

HANDY HITCH HANDLE-2HOLE PLATE

DEREK SCOTT
Handy Hitch Handle is lightweight, durable and bolts together in minutes. Transporting that dirty, greasy, heavy hitch bar can now be done with ease.
Stock #Retail
832-21
Request quote

HITCH GRIP

LMD PRODUCTS INC.
This revolutionary tool make lifting, carrying and attaching your trailer hitch assembly fast, safe and easy! You will keep your clothes clean and never strain your back again.
Stock #Retail
832-23
Request quote

54970 ADJ. HITCH BAR - STND.

1-1/4" Drop, 6" Rise 13" Length
CEQUENT TOWING PRODUCTS
Standard Hitch Bar is # 832-8 and can be used with all 2" x 2" weight distribution kits. Other sizes available to accommodate different drop/rise requirement. Hitch bars may be used in either the up or down position to match the ball mount to any coupler height.
Stock #Retail
832-8
Request quote

3212 ADJ. HITCH BAR - 12"

1" Drop, 5-3/4" Rise, 14" Length
CEQUENT TOWING PRODUCTS
Standard Hitch Bar is # 832-8 and can be used with all 2" x 2" weight distribution kits. Other sizes available to accommodate different drop/rise requirement. Hitch bars may be used in either the up or down position to match the ball mount to any coupler height.
Stock #Retail
832-9
Request quote

SOCKET PINS W/ THUMB CLIPS

Large
PROGRESS MFG
Pair of socket pins with thumb clips.
Stock #Retail
833-10
Request quote

SWAY BRACKET JACKETS (2/PK)

PROGRESS MFG
Sway bracket jackets are plastic pieces that fit around the L-brackets minimizing wear and giving a quieter ride. Contains two sway bracket jackets.
Stock #Retail
833-11
Request quote

10" FRAME INSIDE LINK PLATE

Inside Link Plate For 10" Frame
PROGRESS MFG
The portion of the sway bracket that is installed on the inside of the trailer frame.
Stock #Retail
833-12
Request quote

10" FRAME OUTSIDE LINK PLATE

Outside Link Plate For 10" Frame
PROGRESS MFG
The portion of the sway bracket that is installed on the outside of the trailer frame and has the L-bracket bolted to it. Only compatible with 6 hole L-brackets, not 8 hole L-brackets.
Stock #Retail
833-13
Request quote

HIGH PERFORMANCE LUBRICANT 4OZ

PROGRESS MFG
Easy application tube and less odor. Works great for lubricating hitch balls, hitch head, and L-brackets.
Stock #Retail
833-18
Request quote

SOCKET PIN & CLIP

PROGRESS MFG
Replacement pin and clip to attach arm to the hitch head.
Stock #Retail
833-19
Request quote

SNAP UP LEVER

PROGRESS MFG
Replacement Snap-Up Lever for use with Equalizer hitches.
Stock #Retail
833-26
Request quote

SWAY BRACKET - COMPLETE

Sway Bracket - Left Or Right Hand
PROGRESS MFG
This sway bracket will fit either Left or Right Hand and will match hitches with 6 holes L-brackets. Compatible with 3", 4", 5", and 6" trailer frames.
Stock #Retail
833-27
Request quote

4K HITCH SHANK 6" DROP

6"drop, 10" Rise x 12" Length (4K Only)
PROGRESS MFG
Solid, durable weight distributing hitch bar.
Stock #Retail
833-29
Request quote

2 1/2" SHANK- 3" DROP, 7" RISE

2-1/2" Shank - 12" Long X 3" Max Drop Or 7" Max Rise
PROGRESS MFG
These 2-1/2" shanks are made for customers that have HD pickups with 2-1/2" receivers. Equal-i-zer hitch shanks are made in the USA and come with a limited lifetime warranty.
Stock #Retail
833-30
Request quote

2 1/2" SHANK- 4" DROP, 8" RISE

2-1/2" Shank - 12" Long X 4" Max Drop Or 8" Max Rise
PROGRESS MFG
These 2-1/2" shanks are made for customers that have HD pickups with 2-1/2" receivers. Equal-i-zer hitch shanks are made in the USA and come with a limited lifetime warranty.
Stock #Retail
833-31
Request quote

4" INSIDE LINK PLATE NORCO FRM

Inside Link Plate 4" Frames Including BAL Norco 4-3/8" Frames
PROGRESS MFG
The portion of the sway bracket that is installed on the inside of the trailer frame.
Stock #Retail
833-32
Request quote

8" FRAME INSIDE LINK PLATE

Inside Link Plate For 8" Frame
PROGRESS MFG
The portion of the sway bracket that is installed on the inside of the trailer frame.
Stock #Retail
833-33
Request quote

4" OUTSIDE LINK PLATE NORCO FR

Outside Link Plate For 4" Frames Including BAL Norco 4-3/8: Frames
PROGRESS MFG
The portion of the sway bracket that is installed on the outside of the trailer frame and has the L-bracket bolted to it. Only compatible with 6 hole L-brackets, not 8 hole L-brackets.
Stock #Retail
833-34
Request quote

8" FRAME OUTSIDE LINK PLATE

Outside Link Plate For 4" Frame
PROGRESS MFG
The portion of the sway bracket that is installed on the outside of the trailer frame and has the L-bracket bolted to it. Only compatible with 6 hole L-brackets, not 8 hole L-brackets.
Stock #Retail
833-35
Request quote

SNAP L-PIN & CLIP

Snap L-Pin 1 Pack
PROGRESS MFG
The new Snap L-pin is the latest and greatest innovation for your Equal-i-zer® hitch. This new design eliminates the need for a separate clip to keep the L-pin in place. Works like a linch pin where the place. The new design also holds the L-pin slightly above the top of the Equal-i-zer spring arm, which helps reduce hitch noise, especially in slow, tight turns. NOTE: The new hitch noise, especially in slow, tight turns. NOTE: The new Snap L-pin is not compatible with the Equal-i-zer Sway Bracket Jackets.
Stock #Retail
833-37
Request quote

SNAP L-PIN & CLIP-2/PK

Snap L-Pin 2 Pack
PROGRESS MFG
The new Snap L-pin is the latest and greatest innovation for your Equal-i-zer® hitch. This new design eliminates the need for a separate clip to keep the L-pin in place. Works like a linch pin where the place. The new design also holds the L-pin slightly above the top of the Equal-i-zer spring arm, which helps reduce hitch noise, especially in slow, tight turns. NOTE: The new hitch noise, especially in slow, tight turns. NOTE: The new Snap L-pin is not compatible with the Equal-i-zer Sway Bracket Jackets.
Stock #Retail
833-38
Request quote

HITCH SHANK 6" DROP

6" Drop, 10" Rise, 12" Length, Draw Bar
PROGRESS MFG
Solid, durable weight distributing hitch bar.
Stock #Retail
833-4
Request quote

E2 HITCH SHANK 4" DROP

E2 Shank 4-7/8" Drop X 9-5/8" Rise X 14" Adj.
PROGRESS MFG
Adjustable shanks for Fastway e2 hitches.
Stock #Retail
833-45
Request quote

E2 HITCH SHANK 6" DROP

E2 Shank 6-1/8" Drop 10-7/8" Rise X 13" Length Adj
PROGRESS MFG
Adjustable shanks for Fastway e2 hitches.
Stock #Retail
833-46
Request quote

E2 HITCH SHANK 8" DROP

E2 Shank 8" Dropx No Rise X 14" Adj.
PROGRESS MFG
Adjustable shanks for Fastway e2 hitches.
Stock #Retail
833-47
Request quote

E2 HITCH SHANK 2" DROP

E2 Shank 2.5" Drop, 5.5" Rise, 12" Length
PROGRESS MFG
Adjustable shanks for Fastway e2 hitches.
Stock #Retail
833-48
Request quote

HITCH SHANK 9" DROP

9" Drop, 13" Rise, 12" Length, Draw Bar
PROGRESS MFG
Solid, durable weight distributing hitch bar.
Stock #Retail
833-5
Request quote

HITCH SHANK 4" DROP

4" Drop, 8" Rise, 12" Length, Draw Bar
PROGRESS MFG
Solid, durable weight distributing hitch bar.
Stock #Retail
833-7
Request quote

SNAP L PIN AND CLIP - SINGLE

Single Spare Pin Pack
PROGRESS MFG
Lost Spare Pin Survival Pack
Stock #Retail
833-8
Request quote

DOUBLE SPARE PIN PACK

PROGRESS MFG
Lost Spare Pin Survival Pack
Stock #Retail
833-9
Request quote

FRAME BRACKET ASSEMBLY-2/PK

Snap-up Bracket-2/pk
CEQUENT TOWING PRODUCTS
Wt. Dist. Part, Lift Unit Kit, (2) Brackets and Handle
Stock #Retail
834-1
Request quote

54938 ADJ.BALL MOUNT 14"BAR

With #3212 Hitch Bar For Standard Trunnion
CEQUENT TOWING PRODUCTS
Complete adjustable ball mount. Hitch ball not included
Stock #Retail
834-11
Request quote

58162 CHAIN LIFTER HANDLE

Snap-Up Handle
CEQUENT TOWING PRODUCTS
Replacement handle for Snap-up Brackets.
Stock #Retail
834-16
Request quote

58033 SQ. HEAD SET SCREW 2/KT

Square Head Set Screw
CEQUENT TOWING PRODUCTS
Replacement Square Head Bolts for use on Snap-up Brackets. 1/2" - 13 x 3-1/2". 2 per package.
Stock #Retail
834-17
Request quote

SAFETY PIN

Bulk
Replacement Pin for use on Snap-Up Brackets. Designed to lock Snap-Up Bracket in place during use.
Stock #Retail
834-20
Request quote

58025 TRUNNION LATCH KIT

CEQUENT TOWING PRODUCTS
Stock #Retail
834-21
Request quote

58167 BALL MOUNT W/HARDWARE

High-Performance Trunnion Head W/Hardware
CEQUENT TOWING PRODUCTS
Adjustable ball mounts for use with Reese Weight Distributing Hitches. Comes complete with hardware.
Stock #Retail
834-23
Request quote

55630 CHAIN PACKAGE

CEQUENT TOWING PRODUCTS
Replacement chain for use with Chain Style Weight Distributing Hitches. Includes 1x 9 Link Chain, 1 x U Bolt, 2 Washers and 2 Nuts.
Stock #Retail
834-27
Request quote

63971 ADJ. HITCH BAR - TALL

Wt.dist. Shank 15,000lbs (GTW) 1,500 Lbs (TW) 14" Length, Extra Drop (use In Drop Position Only)
CEQUENT TOWING PRODUCTS
Standard Hitch Bar is # 832-8 and can be used with all 2" x 2" weight distribution kits. Other sizes available to accommodate different drop/rise requirement. Hitch bars may be used in either the up or down position to match the ball mount to any coupler height.
Stock #Retail
834-29
Request quote

3344 ADJ. HITCH BAR - TALL

8-5/8" Drop, 0" Rise, 11" Length
CEQUENT TOWING PRODUCTS
This Extra drop hitch bar is designed for use with all Trunnion and Round Bar Weight Distribution kits. Use in the DROP position only. 2" x 2" solid shank. Black powder coated finish. 1400/1 4,000 lbs. (TW/GTW).
Stock #Retail
834-30
Request quote

63911 ADJ. HITCH BAR-11"

Adjustable Hitch Bar, 11" length
CEQUENT TOWING PRODUCTS
Rated at 12,000 lb. gross trailer, and 1,200 lb. tongue wt. Industry standard 6 mounting holes at 1.25" apart.
Stock #Retail
834-31
Request quote

54985 ADJ. HITCH BAR - TALL

6" Drop, 9-1/2" Rise, 14" Length
CEQUENT TOWING PRODUCTS
Tall adjustable Hitch Bar for use with the Mini Weight Distributing Hitch. # 831-0 and 831-1. Can
Stock #Retail
834-39
Request quote

54998 ADJ. HITCH BAR

Adjustable Hitch Bar 12-1/4" Length
CEQUENT TOWING PRODUCTS
Cast shank, machined for a tighter fit. Rated up to 16,000 lbs. GTW and 1,600 lbs. TW. Seven vertical mounting holes with groove for mounting accessories. Works with any weightdistributing
Stock #Retail
834-42
Request quote

58112 BALL MOUNT ASSEMBLY

Weight Distributing Round Bar Hitch W/Hardware
CEQUENT TOWING PRODUCTS
Adjustable ball mounts for use with Reese Weight Distributing Hitches. Comes complete with hardware.
Stock #Retail
834-43
Request quote

HIGH PERF.COMPLETE ADJ. BALL M

Ball Mounts With Hitch, W/54970 For High Preformance Trunnion Style
CEQUENT TOWING PRODUCTS
Complete adjustable ball mount. Hitch ball not included
Stock #Retail
834-47
Request quote

3280 POLE TONGUE ADAPTER

CEQUENT TOWING PRODUCTS
A Pole Tongue Adapter is used as a mounting platform for the hook-up brackets of a weight distributing hitch system when a trailer has a pole or straight tongue rather than an A-frame tongue. Fits all lift units regardless of manufacturer. Fits Tongue Widths From 1-5/8" to 5". Fits Tongue Heights From 3" to 6".
Stock #Retail
835-13
Request quote

TEFLON BALL LUBE

CEQUENT TOWING PRODUCTS
Non greasy, water resistant, non-toxic, reduces coupler and ball wear.
Stock #Retail
835-20
Request quote

Hitch Shin Guard

Yellow
PROGRESS MFG
The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.
Stock #Retail
853-10
Request quote

Hitch Shin Guard

Black
PROGRESS MFG
The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.
Stock #Retail
853-8
Request quote

Hitch Shin Guard

Orange
PROGRESS MFG
The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.
Stock #Retail
853-9
Request quote